FREE IN-HOME MEASURE · FISHERS(317) 863-9966
Motorization done right

Custom Window Treatments in Fishers, Indiana

Blinds, shades, shutters and motorized systems measured in your Fishers home. Two story great room glass is common here, and reaching it is a design decision we'll walk you through before you spend anything.

If we're busy with another customer and miss your call, leave a message and we'll call you back.

★★★★★
4.8497+ Google reviews
Quick Answer

Most Fishers questions come down to three things: what does it cost, how long does it take, and what will annoy me later. Below are honest answers to all three, including the parts that don't flatter us.

  • Services: faux wood blinds, wood blinds, vertical blinds, aluminum mini blinds
  • Service area: Fishers, Hamilton County, IN and surrounding areas
  • Two different timelines apply. New custom product takes weeks because it has to be made. Repairs to what's already hanging, a cord lock, a ladder string, a chain that jumped the clutch, are usually far quicker.
  • Insured and bonded
  • Serving Fishers, IN since 2008
No Cost, No Obligation

Schedule Your Free In-Home Measure

The measure happens in your house, because fabric reads differently under your own light than under a showroom's. We take three widths and three heights at every opening, run a diagonal check, confirm flat depth at the stop against the product line being quoted, and decide roll direction there rather than at install. On a Fishers two story we also settle how the tall openings get reached, since that decides whether a product is quotable at all. Finished sizes and mount type go to you in writing.

Assessment at no charge
Every opening measured three ways in Fishers
Insured and bonded
Written scope and lead time before you order

I agree to be contacted by Fishers Window Treatments regarding my inquiry.

Most window treatment problems in Fishers trace back to the same two numbers. The county assessor records 31,468 single family parcels here with a year built, and 26 of them predate 1940. Of the 31,492 parcels carrying a story count, 73.8% sit at two stories or more, the highest share in the county. Put those together and you have a city where the openings measure square and the hard part is reaching them. A 2002 two story off Cyntheanne Road has a family room wall of glass two stories up, a half round transom over the front entry and somewhere between twenty and thirty two openings in total. We measure all of them in your house, order to those numbers, and hang the result ourselves.

Top treatments, cornices, valances and fascia all do the same basic job of hiding hardware, but they hide different amounts. A fascia on a roller conceals the tube and gives a clean line. A fabric valance softens it. A cornice adds architecture. In Fishers rooms with tall openings a top treatment is often what makes the window look finished rather than merely covered.

The climate argument for cellular shades holds up in central Indiana because we get punished twice. January average lows near 21 degrees, July average highs above 85, and a muggy stretch from late May through late September. DOE and Oak Ridge testing showed cellular shades saving up to 20% of heating energy and up to 15% of total heating and cooling energy against a bare window. Those are test results, not a prediction for your Fishers house.

4.8★
Google Rating
497+
Google Reviews
18
Years Experience
Free
Inspections
New Construction

Built in the Last Few Years?

Many of our Fishers customers moved into a house built by one of these companies. Builder blinds are usually stock sizes trimmed to fit, so if yours came with the house and never ran right, that is why. We measure the openings as built rather than off the plan.

D.R. Horton
Lennar
Pulte Homes
Fischer Homes
David Weekley Homes
Ryan Homes
M/I Homes
Drees Homes
Beazer Homes
Olthof Homes
AR Homes

Named for identification only. Fishers Window Treatments is an independent company and is not affiliated with, endorsed by, or acting as a representative of any homebuilder listed.

Local Knowledge

What Matters at the Window in Fishers

What our crew has learned working in Fishers homes.

About Fishers Homes

Fishers's median house dates to 2002. Build era shares on the parcel record run pre-1940 0.1%, 1940-1979 2.9%, 1980-1999 37.2%, 2000-2019 51.1%, 2020+ 8.7%. Median home value is $391,000. Overwhelmingly modern. With 51.1% of the stock built 2000-2019 and 8.7% built since 2020, roughly three in five Fishers houses have square rough openings and consistent jamb depth. The 1980-1999 third is the one to measure carefully - drywall returned openings with no applied casing are common in that generation and the usable inside mount depth is whatever the drywall crew left. 1990s-2000s builder traditional two story with brick front and vinyl sides; 2000s transitional and craftsman detail production housing; Geist area waterfront and golf frontage houses with outsized rear glass; Del Webb single level ranch plans in Britton Falls; 2014-onward attached product -. Typical opening count: 20-32 openings for the dominant 1995-2015 two story.

Where We Work in Fishers

We cover homeowners across Fishers near Nickel Plate District and the NPD Amphitheater, Nickel Plate Trail downtown hub with the pedestrian tunnel under 116th Street, Geist Reservoir, Geist Waterfront Park, Fishers District, Saxony.

Surrounding Areas We Serve

Our crew also covers Sunblest Farms, The Hawthorns, Springs of Cambridge, Windermere, Avalon of Fishers, Britton Falls, Saxony, Nickel Plate District, Thorpe Creek, The Geist cluster.

Recent Weather Patterns

Central Indiana sits in IECC climate zone 5A, which means a real cooling load and a real heating load on the same window. NOAA's 1991-2020 normals for Indianapolis put the July average high at 85.2F, the January average high at 36.1F and the January average low at 20.9F, with the muggy season running May 25 to September 22. Fishers is the least shaded established town of the five in terms of housing age: only 3.0% of its single family houses predate 1980, against 24.4% in Carmel and 35.2% in Cicero.

What Our Crew Sees in Fishers

Two story great room window walls are the signature Fishers problem, and they are concentrated rather than scattered because whole subdivisions were built to the same elevations inside a few years. Half round and elliptical transoms over front entries and foyers are near universal on 1995-2010 production elevations. Active new construction includes Knoll at Thorpe Creek, Woods at Thorpe Creek, Enclave at Vermillion, Woods at Vermillion, Geist Manor.

The Team

Who Actually Turns Up in Fishers

The same people measure, order and install. Customers name them in reviews, which is the point: you are not getting a subcontractor you have never heard of.

Josh, Owner
Josh
Owner
Ryan, General Manager
Ryan
General Manager
Justin, Production and Sales
Justin
Production and Sales
Max, Production
Max
Production
Eril, Production
Eril
Production
Handy, Installation
Handy
Installation
Mende, Installation
Mende
Installation
Paula, Office
Paula
Office
Kelli, Office
Kelli
Office
Juan, Installation
Juan
Installation
Jason, Sales
Jason
Sales
Renee, Business Developer
Renee
Business Developer
Current Offers

What We Are Running in Fishers Right Now

Both offers apply to work quoted and ordered while they are posted here. Ask about them at the in-home measure and we will put the discount on the written quote before you decide anything.

Offer 1

$500 Off Your First Exterior Screen, Plus a Free Motorization Upgrade

Take $500 off your first exterior screen and we will add the motorization upgrade at no charge. Exterior screens stop solar heat outside the glass, which is the only place you can stop it before it is already in the room, and a motor is the difference between using one and forgetting it.

Applies to a first exterior screen. Ask at the measure so the discount is on the written quote before you order. Motorized product runs on batteries that need replacing, about a year on Hunter Douglas PowerView.

Ask about this offer
Offer 2

Free Motorization Upgrade on Select Interior Shades

Pick from the qualifying interior shade lines and the motorization upgrade is free. It is worth most on the openings you would otherwise leave alone: tall great room glass, anything above a stair, and the west windows nobody remembers to close by four.

Select interior shade lines only. We will tell you at the measure which of your openings qualify. Batteries are a real running cost and are not included.

Ask about this offer
Flexible Financing

Payment Options That Work for You

A whole-house order is a real number. Our lender partners offer terms that fit a range of budgets so you can phase the cost without phasing the install. Ask Fishers Window Treatments for current rates.

Deferred Payment Plans

Start the work now and begin paying later. On a whole-house order this is how people phase a large job without phasing the install.

  • Payments deferred for a promotional period
  • Rate and period set by the lender
  • Quoted price held for the order
Equal Payment Plans

Divide the project cost into equal monthly payments across a fixed promotional period, so the budget is predictable from day one.

  • Equal monthly payments
  • Fixed promotional period
  • Simple, predictable budgeting
Long-Term Financing

Spread a larger window treatment project across a longer term with fixed equal payments, for homeowners who want the lowest monthly amount.

  • Extended terms available
  • Fixed equal payments
  • Suited to larger window treatment projects
Ask About Financing

Financing is arranged through third party lenders and is subject to credit approval. Rates, terms, and promotional periods are set by the lender and disclosed to you in writing before you sign. Ask your project lead which programs are open right now.

Free In-Home MeasureMeasured In Your HomeLocal CrewWritten ContractDocumentation Done RightTrusted WorkmanshipHomeowner ApprovedWritten Scope Every TimeFree In-Home MeasureMeasured In Your HomeLocal CrewWritten ContractDocumentation Done RightTrusted WorkmanshipHomeowner ApprovedWritten Scope Every Time
Professional Services

Fishers window treatments, Start to Finish

From one room to a whole house, Fishers Window Treatments measures every opening, orders it custom, and installs it with the same crew that took the measurements.

Faux Wood Blinds in Fishers

Mounting depth decides whether an inside mount is even available. A 2 inch slat needs the headrail to sit fully inside the opening, and shallow trim in some older Fishers homes won't give that. When the depth isn't there we go outside mount on a bracket rather than force it.

Learn more

Wood Blinds in Fishers

Tilt motors exist for wood, and a lift motor has to move real weight. Hunter Douglas puts PowerView battery life at roughly a year, which across a Fishers house full of wood blinds becomes a recurring chore nobody quotes up front. We'll quote it.

Learn more

Vertical Blinds in Fishers

Against a panel track, a vertical costs less and gives you infinite tilt positions rather than just open or closed. Against a roller shade, it stacks off the glass instead of rolling over it. That's why Fishers patio doors keep coming back to vanes.

Learn more

Aluminum Mini Blinds in Fishers

Aluminum comes in whites plus a range of colors a wood product can't do. A painted finish holds up under sun for years, though it isn't immune, and the blind slows the fading of what's behind it in a Fishers room without ever stopping it.

Learn more

Roller Shades in Fishers

Roll direction gets decided before the order, not on install day. Regular roll drops the fabric close to the glass, while reverse roll carries it away from a crank or a lock. Reverse roll doesn't work behind a fascia, and that's a real constraint on some Fishers windows.

Learn more

Solar Shades in Fishers

Two to five weeks is the normal build. Screen fabrics come from dye lots like anything else, and charcoal in particular varies. Adding one shade to a Fishers bank of windows a year later shows up in raking afternoon light, which is exactly when you're using them.

Learn more

Cellular Shades in Fishers

Cordless cellular is the default for a reason. There's no lift cord and nothing at a toddler's height, and inner-cord non-compliance is a substantial product hazard under 16 CFR 1120.3. In a Fishers nursery we won't quote a corded lift at all.

Learn more

Zebra Shades in Fishers

Zebra fabric's heavier than plain roller fabric, so a wide Fishers opening needs a larger tube to stay straight. Very tall shades also take larger light gaps at the sides, which Lutron notes past 120 inches or beyond a four-to-one height-to-width ratio.

Learn more

Roman Shades in Fishers

Custom fabric treatments nationally run roughly $300 to $4,000 per window depending on the cloth and the size. A Roman in a mid-priced fabric on a standard Fishers window sits well under the top of that range. Local installed pricing isn't published anywhere.

Learn more

Woven Wood Shades in Fishers

This is the product where a later add-on genuinely can't be matched. Grasses come from harvests rather than dye vats, so a shade ordered next year for the same Fishers room will differ in tone and texture. Order every window in the room together, without exception.

Learn more

Blackout Shades in Fishers

For blackout we measure the wall, not just the opening. An outside mount needs overlap on every side and room above for the roll, and in a Fishers bedroom with trim running tight to a corner that overlap's the constraint the whole design works around.

Learn more

Plantation Shutters in Fishers

Shutters take the long end of a two to five week custom lead time, because they're built as a frame and panels for one specific Fishers opening. Paint batches also shift, so a whole house ordered at once matches better than a house ordered room by room.

Learn more

Cafe Shutters in Fishers

Nationally, interior shutters run about $175 to $800 per window and cafe height sits toward the lower half of that band. Nobody publishes installed pricing for Fishers or anywhere near it, so we're quoting from your measured openings rather than from an average.

Learn more

Motorized Shades in Fishers

Setting travel limits is the part that decides whether the job looks right. Each motor learns its own top and bottom stop, and if the shades on one Fishers wall land at slightly different heights, you'll see it from the doorway. We set them with you standing there.

Learn more

Custom Drapery in Fishers

Yardage drives the price more than labor does. A large pattern repeat means cutting waste on every panel, so the same Fishers window can quote very differently depending on whether the print repeats every few inches or every couple of feet, and that's before lining.

Learn more

Valances & Top Treatments in Fishers

A fabric valance and a manufactured cassette do the same structural job differently. The cassette is tight and low profile, matched to the shade, while the valance brings color and softness the hard product can't. Which one suits your Fishers room is a style call, not a technical one.

Learn more

Exterior Solar Shades in Fishers

Outdoor openings aren't square and posts aren't plumb. We measure a Fishers porch bay at several heights and check each post for lean, because a shade built to one number will show a wedge of daylight down one side that no adjustment closes.

Learn more

Retractable Awnings in Fishers

National figures for retractable awnings run about $1,000 to $6,000 installed, and the range is mostly width and cassette type, plus whether there's a motor on it. A modest manual unit over a Fishers back door and a wide motorized cassette over a full patio aren't the same conversation.

Learn more

Commercial Window Treatments in Fishers

Ask what the number includes. A commercial quote should separate product, install labor, any after-hours premium and any structural or electrical work required at the Fishers site, because a single lump sum hides exactly the items that'll turn into change orders later.

Learn more

Skylight Shades in Fishers

Angled glass takes the steepest solar load of any opening in a house, because the sun's hitting it closer to straight on. In July, with Indianapolis normals near an 85.2F high, an uncovered Fishers skylight will heat the room under it faster than any wall window can.

Learn more

Sliding Glass Door Blinds in Fishers

Drapery on a patio door looks better than almost anything else and it's the least practical thing you can hang there. If a Fishers slider gets daily traffic, panels work as stationary decoration with a functional shade behind them rather than as the working treatment.

Learn more

Panel Track Blinds in Fishers

Panel fabrics cover more ground than most people expect: solar mesh with a stated openness factor, room darkening weaves, woven grasses and textured linens. A Fishers room can get glare control on one opening and near-darkness on another, and it's the same track system.

Learn more

Sheer Shades in Fishers

There's very little insulating value in a sheer shade, and pretending otherwise would be dishonest. When a Fishers January runs a 20.9F normal low, this product handles light and privacy while a cellular shade or a lined panel handles the cold. Sometimes a room needs both.

Learn more

Pleated Shades in Fishers

Light filtering and room darkening pleated fabrics look nearly identical folded and behave completely differently on the window. The darkening version has a backing that blocks far more light in a Fishers bedroom, and it'll show the lift cord holes more obviously against it.

Learn more

Bamboo Shades in Fishers

The edge binding is worth a conversation, and it's usually skipped. A bound edge in cloth tape gives a woven shade a finished line and keeps the weave from fraying, and on a Fishers window with painted casing that binding is what makes the shade look made rather than cut.

Learn more

Dual Shades in Fishers

Dual and banded shades for Fishers homes. Alternating sheer and opaque bands on one roller tube, so a single shade covers the daytime view setting and the nighttime privacy setting without a second treatment on the window.

Learn more

Top-Down Bottom-Up Shades in Fishers

Fabric runs in dye lots, and this configuration shows more of the fabric face than a standard shade does when it's partly open. A Fishers client adding a matching window later should expect a visible difference, so ordering the room in one batch is the safer plan.

Learn more

Cordless Blinds in Fishers

If January is your reason for shopping, say so at the measure. Slat blinds close but they don't seal, and DOE and ORNL testing credits cellular shades with up to 20 percent heating energy savings against a bare window. Plenty of Fishers houses end up with both, room by room.

Learn more

Hardwood Shutters in Fishers

Shutters are fitted to specific openings, so they stay with the house. That's worth something in a Fishers listing, where a buyer walks in and sees finished windows rather than a promise. It also means the money doesn't move with you, which is a fair thing to weigh.

Learn more

Composite Shutters in Fishers

Two to five weeks is the normal window from measure to install, and a composite order rarely runs at the long end of it since the finish is applied in fabrication and isn't sprayed to a custom color. Your Fishers install date gets set once the shop confirms, not before.

Learn more

Smart Home Shade Integration in Fishers

Travel limits are the part people don't think about. Every motor has to learn where the top and bottom stops are, and a shade that was re-hung, re-tubed or moved needs those limits reset. We check limits on every Fishers shade as part of pairing, not as a callback later.

Learn more

Blind Repair & Restring in Fishers

Older cord safety kits are worth removing, not repairing. Cleats, tie-downs, wall hooks and tension devices only work when someone uses them every single day. If a Fishers household has small children, converting the lift or changing the treatment is the durable answer, and we'll say that plainly.

Learn more

Shutter Repair in Fishers

Panels bind in the muggy stretch from late May into September, then swing free again in winter. If a hardwood Fishers shutter only sticks in August, the fix is usually a light adjustment at the edge rather than a rebuild, and we'd rather do that than take material off in the wrong season.

Learn more

Motorization Retrofit in Fishers

Retrofitting a branded shade can affect its warranty. Putting a third party motor inside a manufacturer's tube is often outside what that maker will support, and a Fishers customer deserves to know that before the work, not when a fabric issue comes up two years later.

Learn more

Outdoor Patio Shades in Fishers

Snow load is the other seasonal risk. A shade left extended under a covered Fishers porch can catch blowing snow and take on weight the hardware was never rated for, so a retracted cassette through January isn't us being cautious, it's how the system is designed to survive.

Learn more

Office Window Treatments in Fishers

Open-plan glare is a geometry problem before it's a product problem. A monitor with a bright window behind it stays unreadable no matter what fabric you hang, so a Fishers floor plan gets looked at alongside the shade spec, and sometimes the cheapest fix is turning the desks.

Learn more

Healthcare Window Treatments in Fishers

Behavioral health areas have their own hardware requirements, and they're specialized. A Fishers facility working in that environment should specify products designed and tested for it rather than adapting a standard shade, and we'll say plainly when a request falls outside what a conventional treatment can do.

Learn more

Multifamily Window Treatments in Fishers

Energy is a product attribute worth knowing at scale. DOE and ORNL testing credits cellular shades with up to 20 percent heating energy savings against a bare window, and that's relevant where a Fishers owner pays utilities on common areas or markets efficiency to residents.

Learn more
Josh LeClair founder Fishers Window Treatments
Josh LeClair
Founder
About Us

Local Expertise, Real Results

A three point measure catches an opening that has gone out of square. A depth check at the stop catches the one that won't take an inside mount at all, and in a city where the median house was built in 2002, that second check is the one more likely to change your order.

Fishers Window Treatments sells custom blinds, shades and shutters in Fishers, and the part customers usually remember is what we told them before the sale rather than after. Light gaps on inside mounts. Battery life on motorized shades. Wood movement in a humid room. Those disclosures cost us the occasional order across Hamilton County and save every relationship.

We work the way Fishers houses are actually built. Slightly more than half the single family stock, 16,082 parcels or 51.1%, went up between 2000 and 2019, with another 8.7% since 2020. That means factory consistent openings with predictable mounting depth, and it means an inside mount at tight tolerance is genuinely achievable here more often than anywhere else in Hamilton County. It also means the same elevation repeats down a whole street, so the arched head over your neighbor's front entry is very likely the same one over yours. We still measure yours. Plan repetition tells us what to load on the truck. It doesn't tell us what to order.

The other third of the city is the part that needs care. 11,715 Fishers houses, 37.2% of the stock, were built between 1980 and 1999, and that generation used drywall returns instead of applied casing on a great many openings. Usable inside mount depth in those houses is whatever the drywall crew left, and it changes from one opening to the next inside a single room. The mid-1990s Windermere plats are full of that condition and so are the older Geist side streets. Sunblest Farms adds thirty to fifty years of movement on Hamilton County clay, where the diagonal matters as much as the width. We confirm depth at every opening before we quote an inside mount.

Our Promise

We tell you what your product won't do before you buy it: where light gets in around an inside mount, what motorized batteries cost to keep running, which of your rooms will move a hardwood louver, and what a shade over 120 inches tall does to a light gap. Measure it wrong and we remake it at our cost.

Why Fishers Chooses Us

How We Keep Fishers Jobs Off the Reorder List

Serving Fishers and Hamilton County with quality materials, thorough inspections, and transparent pricing.

Built for the tall rooms

73.8% of Fishers houses carry two stories or more, and on the 1995 to 2015 plans a large share of the glass sits in a family room or a foyer running the full height. We bring ladders, and where the opening genuinely needs it, a mast lift or scaffold, rather than quoting a shade we can't hang safely. Motorization on those openings is a specification decision rather than an upsell, because nobody climbs to a cord at the top of a two story wall twice a day.

Depth checked at every stop

An inside mount needs flat depth at the stop, and the required number differs by product line because cassette, roller tube and headrail depths aren't the same. In the 37.2% of Fishers houses built between 1980 and 1999 that depth is drywall return rather than casing, and it can change inside one room. We measure it opening by opening and put the mount type in writing before anything is ordered.

The light gap gets disclosed

An inside mounted blackout fabric leaks light at the edges. Lutron publishes three quarters of an inch per side on its Roller 20 and 64 systems against a standard factory deduction of one sixteenth per side, and shades 120 inches and taller, or running a 4:1 height to width ratio, get larger gaps than that. Fishers has an unusual number of shades over 120 inches. If you want a room that genuinely goes dark, we say so at the measure.

One contract, two seasons

Central Indiana carries a real cooling load and a real heating load, so a shade bought for a July afternoon has to earn its keep in January as well. Every residential job over $150 goes on a written contract under the Indiana Home Improvement Contract Act, carrying the scope, the start and completion dates and the total price. Custom fabrication runs two to five weeks and you get the honest date rather than a flattering one.

Our Process

How We Quote a Fishers Home

Nothing here happens overnight and nothing here needs to. What matters is the order it happens in. Custom product takes two to five weeks to fabricate, and on a new Fishers build the treatments go in after paint and flooring are finished, which is why the people who leave it until last spend a month living behind bare glass. Here's the sequence we run, and the point in it where you get a number you can rely on.

We come and look

A conversation in the room that's actually bothering you. Which windows, what the sun does to them and at what hour, whether anybody can physically reach them, and what you've already tried and thrown away. On a whole house job in a Fishers two story we walk both levels and count openings, because twenty eight openings is a different conversation from four.

Measure, depth, diagonal

Three widths and three heights per opening, narrowest width and longest height for an inside mount, a diagonal check for square, and flat depth confirmed at the stop against the product line being quoted. Roll direction is decided now, with a check that a reverse roll won't foul a crank or a window lock. Anything outside tolerance converts to an outside mount at the measure, not after the boxes land.

Written quote, written scope

You get finished sizes, mount type, fabric and openness factor, control type and the stated light gap in writing. Residential work over $150 goes on an Indiana Home Improvement Contract Act contract carrying a detailed description, start and completion dates and the total price. Deposit at order and balance on completion, with nothing due before you have seen the numbers.

Install, set, dress

We hang it, level the headrails, set upper and lower travel limits on every motor, and build the scenes with you standing in the room. Drapery gets steamed and dressed at installation so the panels break correctly instead of hanging in factory folds. Then we show you how to re pair a motor after a battery change and leave that with you in writing.

Common Causes

What we see most often on Fishers window treatments

Fishers homeowners typically call us about these scenarios.

Condensation Marking A Wood Blind

Real wood sitting against cold glass through several central Indiana winters shows it, usually as swelling or a mark along the bottom slat. Faux wood or a moisture-tolerant product in that opening wouldn't have. It's a specification question that gets decided by whoever sold the first set. Once the timber has swollen there's no fixing it, so the choice matters at the order.

Nobody Explained The Light Gap

An inside mounted shade was installed and the customer can see daylight down both sides. Nothing is faulty. Lutron publishes inside-mount gaps of about three quarters of an inch per side on their roller systems, and taller shades get more. Had that been stated in writing before the order, the room would have been designed differently.

A Bedroom That Never Goes Dark

Somebody works nights, or a toddler is waking at half past five in June. Often there's already a room darkening shade in the opening and it's failing at the edges rather than through the fabric. Genuine darkness in a Fishers bedroom needs side channels, a light-blocking pocket or an outside mount with real overlap.

Ladder Strings That Have Let Go

On an older wood blind, the strings that carry the slats fray and eventually snap, leaving slats sagging or hanging out of line. Restringing is a real option and it costs far less than a new blind. Whether it's worth doing depends on the condition of the headrail and the slats, and we'll tell you straight.

Stock Shades That Did Not Fit

Somebody measured the trim instead of the opening, bought four shades from a big box and found they were an inch too wide. There's a pile of them in the garage. That single mistake is behind a lot of our first calls in Fishers, and it's why we measure rather than taking your numbers.

Hardwood Shutters Cupping In A Bathroom

Timber louvers in a room with a shower running twice a day through a muggy central Indiana summer will move, and once they have cupped they don't come back. It's the most expensive avoidable mistake in this product. Composite in wet rooms and hardwood everywhere else is the specification that lasts.

How We Work

Five Stages, In This Order

Custom window treatments are made to your openings, so the order matters more than it does in most trades. This is how every Fishers job runs.

1

Free In-Home Measure

Every opening gets three widths, three heights and a diagonal square check, because houses settle and an opening that is out of square is the difference between a shade that runs true and one that binds. Mounting depth gets read at the jamb. It all goes on paper before any product conversation starts.

2

Product and Fabric, In Your Own Light

Samples get looked at in the room they are going in, not under showroom lighting. This is where openness factor, inside versus outside mount, roll direction and material get decided, and where we tell you the light gap you are going to live with.

3

Written Scope and Contract

Opening by opening, with the mount type, the light gap, the operation and the total price in writing. Indiana requires a written contract on residential work over $150 under IC 24-5-11, and we would write one anyway.

4

Custom Fabrication

Your sizes go to the workroom. Two to five weeks is typical depending on product and finish, longer on specialty shapes and motorized configurations. You get the real date at the measure rather than a range.

5

Install and Walkthrough

Brackets anchored for the substrate they are going into, everything checked level and square, motor travel limits set and scenes built with you standing there. Then we show you how it all works and take the packaging with us.

Client Reviews

Fishers Reviews About Fabric Choices

4.8 stars across 497+ Google reviews for The Window Valet, who runs this service.

★★★★★

"Justin was very helpful! Super friendly and got me taken care of right away! Highly recommend! Will definitely be using him for future projects!"

BB
Bunty Badasay
★★★★★

"I had a wonderful experience working with The Window Valet to select and install window treatments for our new construction home. Erica, our sales consultant, was incredibly helpful in providing an overview of the vast selection of window treatments offered, making tasteful recommendations for various spaces throughout our home, and advocating for us to offer the most competitive pricing possible so we could stay within budget. Handy, our installer, was a pleasure to work with and the perfect balance of quick and meticulous."

CC
Courtney Cassady
★★★★★

"Whole process went very smooth. Salesperson Justin was very knowledgeable and nice. Installer Leo was quick and efficient. Everyone was very professional and helpful. Price was about what we expected. Products seem well made so far and work as expected. Installers Handy and Eric even came back out after we had internet to set that up and show us how to use the app."

SD
Shelli Denni
★★★★★

"This is the second home we have used Window Valet. Owner Josh is a trusted, honest businessman and ensures customer satisfaction. His staff is very professional, pleasant and you can depend on an answer to any question. Salesperson Erica was very helpful and knowledgeable of their product and our needs. Installer Handy, very knowledgeable of product and ensures you fully understand use of product. He was very respectful of our home, removed shoes, thoroughly cleaned up after installation."

TC
Tom Clark
Common Questions

A Fishers FAQ on Product and Timing

Straight answers to the questions Fishers homeowners ask most.

It depends on how many openings you have and how big they're, and Fishers houses run large on both counts. 52.8% of single family parcels here record 3,000 sq ft or more of residential floor area, and the dominant 1995 to 2015 two story carries roughly twenty to thirty two openings. Nationally, custom product runs about $250 to $2,600 per window against $60 to $600 for stock, and shutters sit around $175 to $800. Nobody can honestly give you a per house figure without standing in it. What we can do is walk the house, count openings, and put a written number on each room so you can phase it.
Yes, and it's the most common tall glass job in this city. 73.8% of Fishers single family parcels record two stories or more, the highest share in Hamilton County, and on the 1995 to 2015 plan sets that means a family room or foyer wall running the full height. We use ladders where a ladder is safe and a mast lift or scaffold where it isn't. The other half of the answer is operation. A cord at the top of a two story wall isn't something anyone will use twice a day, so on tall openings we quote motorized lift as part of the specification rather than as an extra.
More often than anywhere else in the county, yes. Only 3.0% of the Fishers single family stock predates 1980, and 51.1% went up between 2000 and 2019 with factory consistent openings and consistent depth. That's the reason an inside mount at close tolerance is a reasonable starting assumption here rather than a gamble. We still run a three point measure and a diagonal on every opening, because a reasonable assumption isn't a measurement. Where the diagonal shows the opening has gone out of square beyond tolerance, we convert it to an outside mount at the measure and tell you then, not after the product arrives.
Two things make a Geist elevation different from an inland Fishers one. There's no tree line and no neighboring structure on the water side, and the reservoir throws a reflected component back at the glass on top of the direct sun. That combination usually pushes the fabric to a lower openness factor than the same room would need three miles inland, commonly 1 or 3 percent rather than 5 or 10. We bring openness cards and hold them against your own water view before you pick, because 3 percent on a north cove and 3 percent facing open water at four in the afternoon aren't the same experience.
Two to five weeks from order is the honest range for most product lines, and specialty shapes, motorized configurations and commercial submittals run longer. That's fabrication time, not our schedule. If you're working back from a move in date, a holiday or a listing photo, tell us the date at the measure and we'll tell you plainly whether it's reachable and what would have to change to make it so. What we won't do is quote you a date to win the job. Nobody's house is being harmed while they wait for shades, and we would rather you had a real date.
Start with sequence, not with product. Treatments go in after paint and flooring are finished, so the order date needs to sit two to five weeks ahead of the day you want to stop living behind bare glass. Then triage by room. Bedrooms and any street facing ground floor room come first because those are privacy, west facing living space comes next because that's comfort, and decorative work like drapery and top treatments can follow later without anybody suffering. Fishers ran 216 single family permits in the first half of 2025, so we do a lot of these and we're used to phasing them.
No, and this is worth explaining because Fishers tempts people into it more than most places. Whole subdivisions here were built to the same elevations inside a few years, so the arched head over your entry really may be the same unit as the one next door. What repeats is the plan. What doesn't repeat is how the drywall crew finished each return, how the house has settled, and how the trim carpenter treated a given opening. In the 1980 to 1999 third of the city, usable inside mount depth varies inside a single room. Plan repetition tells us what to bring. It never tells us what to order.
An inside mounted blackout fabric won't, and anyone who tells you otherwise is setting up a warranty call. Fabric blocks light, edges don't. Lutron publishes three quarters of an inch of light gap per side on Roller 20 and 64 systems against a factory deduction of one sixteenth per side, and shades 120 inches and taller, or at a 4:1 height to width ratio, get larger gaps still. A genuinely dark room means an outside mount that overlaps the opening, side channels, or a light blocking pocket at the head. We price that honestly at the measure so nobody is surprised by a stripe of daylight.
The purchase is the visible cost and the batteries are the one people find out about later. Hunter Douglas puts PowerView battery life at about a year, and both the size of the shade and how hard you work it move that figure. An alkaline wand swallows eight to twelve AA cells, and a few product lines want lithium rather than alkaline. On a Fishers house with eight or ten motorized openings, that's a real annual line item and it belongs in the conversation before you sign. Rechargeable wands and small solar charging panels change the math on some openings, and hardwired runs remove it entirely but need a licensed electrical contractor.
Usually yes, and in Fishers it comes up constantly. Half round and elliptical heads over front entries and foyers are close to standard on the 1995 to 2010 production elevations that make up much of this city. The options split into three approaches: a fixed shutter panel cut to the arch, an operable arch treatment, or leaving the arch bare and treating only the rectangular unit below it. Plenty of Fishers homeowners choose the third, because an arch that faces north or sits under a deep overhang may be contributing no glare at all. We look at what that specific arch is doing before we sell you anything for it.
Check your own documents, and we'll work to whatever they say. Every Fishers community we work in has an association of some kind, and several of the larger ones run sub associations by plat: Windermere covers seven recorded plats, Avalon has a separate townhome association, Saxony has a master plus sub associations. What we won't do is tell you there's a rule when we haven't read one. No recorded covenant or published architectural guideline requiring a particular color or finish on street facing window coverings was located for any named Fishers subdivision. If your documents say something specific, bring them to the measure and we'll specify to them.
They're the one product family in this trade with measured testing behind it. DOE and Oak Ridge National Laboratory work at a Knoxville test home from December 2019 to May 2020, modeled across fifteen climate zones, found cellular shades saved up to 20 percent of heating energy and up to 15 percent of total heating and cooling energy against a bare window. Central Indiana runs January average lows near 20.9F over a three month cold season, so there's a real load for them to work against. We'll cite that testing accurately and we won't convert it into a dollar saving for your house, because nobody honestly can.
The Nickel Plate District product is almost all 2018 to 2025 construction, and square set drywall openings with no jamb are the default there rather than the exception. That rules out an inside mount on most of it. What works instead is an outside mount onto the drywall with anchors rated for the load, a ceiling mount above the opening where the head detail allows it, or a recessed light blocking pocket where the building left one. Street facing ground floor units on a public sidewalk also need a privacy answer that a suburban house doesn't, and a top down bottom up cellular shade solves that better than anything else in the catalog.
Understand first that by the time you feel the heat, it's already inside the glass, and an interior fabric is then managing glare rather than heat. Solar shade fabric at a stated openness factor cuts glare and keeps the view, and the number is the whole decision: 1 and 3 percent cut hard, 5 and 10 percent keep more view and cut less. If you want the heat stopped, it has to be stopped outside, which means an exterior solar shade or a retractable awning over the elevation. July averages a high of 85.2F here and the hot stretch runs from late May to late September, so this is a four month problem, not a July one.
Either, as long as the material is right for the room. Central Indiana runs about 3.9 months of muggy weather from 25 May to 22 September and then a dry heated winter, and that annual swing moves real wood. Hardwood shutter stiles and louvers cup, bow and twist through it, joints open, and painted finishes check at the joints. So bathrooms, kitchens, laundry rooms and unconditioned sunrooms get composite or poly shutters, or faux wood blinds in PVC or composite. Hardwood belongs in rooms that stay conditioned year round. We would rather lose the upsell than warranty a hardwood louver in a shower room.
A written contract, because Indiana requires one. The Indiana Home Improvement Contract Act, IC 24-5-11, applies to residential home improvement contracts over $150, which covers essentially every job in this trade. It requires your name and property address, our name, address and contact details, the date submitted and the acceptance deadline, a reasonably detailed description of the work, start and completion dates, the total price, disclosure of any crew, and signatures with legibly printed names. Alongside that you get the measure sheet: finished sizes, mount type per opening, fabric and openness, control type, and the stated light gap where one applies.
Both work and the choice is usually about budget rather than logistics. Whole house has one real advantage that matters more than people expect: fabric is dyed in lots, and ordering a room or a house from a single dye lot is the only reliable way to get a match. Room by room is perfectly sensible if the rooms are visually separate, which in an open 2000s Fishers plan they often aren't. Where a great room, a breakfast area and a kitchen all see each other, treat them as one order. Where a basement guest room is behind a door, it can wait a year without anyone noticing.
Maybe, and you should hear that before you order rather than after. Fabric is dyed in lots and lots vary, so a shade ordered eighteen months after its neighbors can arrive visibly different in the same window wall even when the part number is identical. Hardware finishes drift between production runs too, which shows up on visible brackets and rods. If you know a finished basement or a bonus room is coming, we would rather order that fabric now and store it than roll the dice later. If it's already too late, we'll tell you honestly how likely a match is for that specific line.
It can, and it's a genuine service issue in this market rather than a theoretical one. A four month humid season followed by a dry heated winter means indoor moisture ends up on the coldest surface in the room, which is the glass, and on an inside mount that water can wick into fabric hems and into the cells of a cellular shade. It shows up as dark spotting along the bottom rail, a musty smell, and staining on the room side. Blackout linings and tight side channels make it worse, and a bathroom or a kitchen makes it worse again. We flag the openings at risk during the measure and change the mount or the material before you order.
No. Indiana issues no statewide license for window covering work and Indianapolis has no permit category that captures it, so a company in this trade telling you it holds a state credential for it's describing something that doesn't exist. What's real and checkable is different. Ask for a written contract that meets IC 24-5-11 with the scope, the dates and the total price on it. Ask whether the product being sold to you is built to ANSI/WCMA A100.1-2022, which is the governing product safety standard for corded window coverings. Inner cord non conformance is a substantial product hazard by rule under 16 CFR 1120.3. Those are facts you can verify.
Britton Falls inverts the usual Fishers problem. 1,069 of its 1,223 parcels record a single story, 87% of the community, in a city where 73.8% of houses are two stories or more. So reach isn't the issue and operation is. Every window in that sunroom is workable from a step ladder, which means the deciding question is how the treatment is operated day to day rather than how it gets installed. Cordless lift, wand tilt and motorized control are specification decisions there, not upgrades. If the sunroom is unconditioned, the material question also changes and composite goes in ahead of hardwood.
Sometimes you shouldn't, and we'll say so. An aluminum mini blind in a Fishers garage or a rental utility room is a stock product and buying it stock is the right call. What stock can't do is fit an opening that isn't a stock width, which is most of what a 3,000 sq ft Fishers house contains, and it can't be cut to a width without the ends binding. Stock shades run about $60 to $600 per window against $250 to $2,600 for custom. The difference buys fit, fabric choice, a real light gap disclosure, and a headrail sized so a wide span doesn't sag.
Indiana Climate

Indiana Weather Affects Window Treatments Year Round

Indiana sees some of the most varied weather in the country. Fishers homeowners live in IECC climate zone 5A, which carries a real cooling load in summer and a real heating load in winter. July averages a high near 85F, January averages a high near 36F with lows near 21F, and the muggy season runs from late May into late September. That is why the same window can be the hottest room in the house in July and the coldest in January.

July on unshaded glass

July averages a high of 85.2F and the hot stretch runs roughly 23 May to 21 September. In a Fishers subdivision built after 2000 there's no fifty year canopy standing in front of that west elevation, because the trees went in with the sod. Solar shade fabric at a stated openness factor is the honest interior answer. Exterior shades and retractable awnings are the only way to stop the heat before it has already come through the glass.

January at twenty one degrees

The cold season runs about 1 December to 1 March with January lows near 20.9F. Cellular shades are the one product family in this trade with measured numbers behind them. DOE and ORNL testing found up to 20 percent of heating energy saved against a bare window and up to 15 percent of total heating and cooling energy. That was test home data rather than a promise about your house, and we won't convert it into a dollar figure for you.

Four humid months, then dry heat

Roughly 3.9 months of muggy weather from late May into late September, followed by a dry heated winter, produces real dimensional movement in wood. Hardwood shutter stiles and louvers cup and twist through that cycle and painted joints check open. In a Fishers bathroom, laundry room or unconditioned sunroom the specification is composite or poly. Hardwood belongs where the room stays conditioned, which here usually means the front rooms and the bedrooms.

Reflected glare off Geist

Geist Reservoir was created in 1943 by the Indianapolis Water Company, and the Fishers shoreline runs from about 96th Street north to 113th. A waterfront elevation takes direct sun plus a reflected component off open water, with no neighboring structure behind the house to break either one. That pushes lake facing rooms to a lower openness factor than the same room needs inland, commonly 1 or 3 percent, and it's why a Springs of Cambridge quote and an Avalon quote don't look alike.

Window Treatment in Fishers
Material Guide

Choosing the Right Treatment for Fishers Rooms

An honest breakdown of the three we specify most often, and when each one is the right answer.

Cellular Shades

The one product in this trade with measured energy numbers behind it. Trapped air in the cells does the work, and DOE and ORNL testing found cellular shades saved up to 20 percent on heating energy and up to 15 percent on total heating and cooling against a bare window. In a Fishers house that matters in January and again in July, which is unusual for one product. Single cell suits most rooms, double cell where the glass is large or the room runs cold. Top-down bottom-up gets you daylight and privacy at the same time.

Both seasonsInsulating$$
Solar & Roller Shades

What you reach for when the complaint is afternoon sun. Solar fabrics come in stated openness factors, and that number is the whole decision: a lower openness cuts more glare and more of the view, a higher one keeps the view and cuts less. On a west or south Fishers window this is usually the honest answer rather than blackout, because blackout kills the room. Cassette or fascia hides the roll, and roll direction gets decided at the measure so the fabric does not foul a crank or a lock.

Glare controlKeeps the view$$$
Plantation Shutters

The one that stays with the house. Shutters are a finish rather than a covering, and they do not get replaced every few years. In Fishers the material choice is technical rather than a matter of taste: composite and poly in bathrooms, kitchens, laundry rooms and sunrooms, because a four month humid season followed by a dry heated winter will move real hardwood, and hardwood only where the room stays conditioned. Louver size, frame style and divider rail get decided standing at your window.

PermanentStays with the house$$$$
Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Fishers room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Join Our Team

Experienced Window Treatment Installers Wanted

Ready to advance your window treatment career? Join Fishers's trusted window treatment team. Competitive pay, ongoing training, and a team that takes its documentation and standards seriously.

Call to Apply
Window Treatment crew in Fishers
Local Experience

Fishers Neighborhoods Within Our Range

Window Treatment projects completed across Fishers's neighborhoods and surrounding areas. Click any neighborhood for the specifics we have learned working there.

The Hawthorns is a gated golf and country club community on the Geist side of Fishers, off Fall Creek Road. Under the plat names The Hawthorns and Fairways at The Hawthorns, the county records 52 parcels with residential floor area, and those 52 houses carry 17 distinct construction years spread across three decades: 1992, then 1995 to 1997, 1999 to 2004, 2006, 2007, 2011, 2012, 2014, 2018 and 2021. These were built individually on club lots rather than as a builder wave, which means no two window schedules here match. Adjoining sections of the wider club community are recorded under other plat names, so the club's own membership figure is larger than 52. View The Hawthorns (with Fairways at The Hawthorns) window treatment details →
Springs of Cambridge is a Geist Reservoir waterfront community on the east side of Fishers, off Olio Road. The county records 446 parcels with residential floor area under the Springs of Cambridge plat names, and those houses carry 30 distinct construction years from 1994 through 2025 with almost no gaps, still recording new construction. A 1995 lake house and a 2025 rebuild sit on the same street under the same plat name. 402 of the 446 parcels are recorded at two stories, 90% of the community, and recorded floor area runs 3,409 to 18,437 sq ft, so there's no small house here at all. Residents give directions by the water and by Olio rather than by 96th or 116th. View Springs of Cambridge window treatment details →
Windermere is one community name covering seven separately recorded plats in south east Fishers: Windermere Pointe, Windermere Villas, Windermere Village, Crosswinds at Windermere, Woods Edge at Windermere, Woodlands at Windermere and Ironwood Golf at Windermere. Together they hold 647 parcels with recorded residential floor area, built across 16 distinct construction years, continuous from 1993 through 2005 and then 2007, 2013 and 2015. Inside that single name sit attached villa product, detached two story houses and golf frontage houses, which is three different window schedules under one association family. Residents describe where they live by which of the seven plats they're in, and that's the right way to think about the work too. View Windermere (with Windermere Pointe, Windermere Villas, Crosswinds at Windermere, Woods Edge at Windermere, Windermere Village) window treatment details →
Avalon of Fishers is the largest community in this file after Sunblest Farms, with 1,350 parcels recording residential floor area across Avalon of Fishers, Avalon of Fishers Townhomes, South Avalon Estates and Towns at Avalon North. It built across 17 distinct construction years, continuously from 2004 through 2016 and then again from 2019 to 2022, so the newest townhome blocks are roughly fifteen years younger than the first detached houses. It sits in east central Fishers off 126th Street, between the I-69 corridor and the Geist communities, and every street here carries a London or Arthurian name, which is how residents actually search for it. View Avalon of Fishers (with Avalon of Fishers Townhomes and South Avalon Estates) window treatment details →
Saxony is a master planned mixed use district at the north east edge of Fishers, at 131st Street and Olio Road, and it's the only community in this file that crosses a municipal boundary. The county parcel record puts the residential village inside Fishers while the Saxony Corporate Campus and Northparke sit on the Noblesville side. Across the plat family the county records 442 parcels with residential floor area, built over 22 distinct construction years: one 1977 legacy house on the tract, then 2003 through 2021 continuously, plus 2023 and 2024. The plat names alone carry a hospital, a corporate campus and a medical park alongside the housing. View Saxony (with Saxony Townhomes, Carriage Manor at Saxony, Parkside Towns at Saxony) window treatment details →
The Nickel Plate District is downtown Fishers, and Fishers built it from almost nothing in roughly a decade. Meyer Najem's office building arrived in 2013, then The Depot at Nickel Plate, the city's first higher end downtown apartments, followed by The Edge and Switch for more than $90 million combined, then Spark Apartments, then a $157 million Browning mixed use scheme on East 116th Street begun in spring 2019 with a five story 241-unit apartment building, 10 townhouses, a 168,000 sq ft office building and a 110-room hotel. Noblesville's downtown is nineteenth century. Fishers' is younger than the iPhone, and the residential product in it's urban rather than suburban. View Nickel Plate District (South Village of Nickel Plate, CityWalk on Nickel Plate Trail, Canal Place, Approach) window treatment details →
Thorpe Creek sits in north east Fishers off Cyntheanne Road, between 113th and 126th, running toward the Geist communities. Across three recorded plats, Knoll at Thorpe Creek, Woods at Thorpe Creek and Overlook at Thorpe Creek, the county records 369 parcels with residential floor area, built over 20 consecutive construction years from 2006 through 2025 and still building. The number that defines the community is the floor: no house here records under 3,406 sq ft of residential floor area. That's the highest size floor of any Fishers community in this file, and it means every job in Thorpe Creek is a large job before anybody opens a sample book. View Thorpe Creek (Knoll at Thorpe Creek, Woods at Thorpe Creek) window treatment details →
The Geist cluster is a band of more than twenty separately recorded plats along the Geist Reservoir shoreline on the east and south east side of Fishers, running from about 96th Street north to 113th, with plats on both the Fishers and unincorporated sides. Parcels whose recorded plat name contains Geist number 1,097 with residential floor area, spanning 38 distinct construction years from 1983 through 2025. The adjoining Masthead, The Anchorage and Lake Stonebridge communities are recorded under other names and aren't in that count. This isn't one neighborhood and it should never be measured as one. View The Geist cluster - Villages at Geist, Reserve at Geist, Westbrooke at Geist, Valleys at Geist, Fox Hollow at Geist, Intracoastal at Geist, Masthead, The Anchorage, Lake Stonebridge window treatment details →
Service Area

Where we respond near Fishers

Our crews measure and install across Fishers and the closest surrounding communities.

Fishers
Hamilton County
Free inspections · written scopes and photo documentation on every project.
Window treatment by Fishers Window Treatments near Noblesville, IN
Noblesville
Hamilton County
Custom blinds, shades, shutters and drapery fitted in Noblesville.
Window treatment by Fishers Window Treatments near McCordsville, IN
McCordsville
Hancock County
Motorized shade limits set and scenes built on site in McCordsville.
Window treatment by Fishers Window Treatments near Carmel, IN
Carmel
Hamilton County
Service on treatments we did not install, across Carmel.
Window treatment by Fishers Window Treatments near Lawrence, IN
Lawrence
Marion County
Free in-home measures scheduled in Lawrence.
Window treatment by Fishers Window Treatments near Westfield, IN
Westfield
Hamilton County
Every opening measured three ways before anything gets ordered in Westfield.
Window treatment by Fishers Window Treatments near Williams Creek, IN
Williams Creek
Marion County
Light gaps and lead times written down before you order in Williams Creek.
At a Glance

Window Treatment Systems Compared in Fishers

Quick reference for the products we specify most often in these homes. Pricing reflects typical Fishers installations.

Every situation is different. The ranges below reflect typical Fishers installations. Your project may price lower or higher depending on what our free in-home measure finds. How many openings you are covering, how big they are, whether any are out of square or a specialty shape, the fabric or material tier, and whether you motorize all affect the final number.
Faux Wood Blinds
Bathrooms, kitchens, laundry rooms and anywhere humidity would move real wood
$55-$300+ per window
Wood Blinds
Conditioned rooms where the grain and the stain match existing millwork
$70-$400+ per window
Vertical Blinds
Sliding doors, wide spans and tall narrow windows
$60-$350+ per opening
Aluminum Mini Blinds
Rentals, utility rooms, garages and commercial spaces where cost per opening rules
$25-$140+ per window
Roller Shades
A clean modern line where the fabric does the work and the hardware disappears
$70-$450+ per window
Solar Shades
West and south glass where you want the view kept and the glare cut
$80-$520+ per window
Cellular Shades
Both seasons: the only product in this trade with measured insulating numbers
$70-$350+ per window
Zebra Shades
Rooms that need a view in the morning and privacy at night from one product
$95-$400+ per window
Roman Shades
Softness and fabric where a hard treatment would feel wrong
$120-$600+ per window
Woven Wood Shades
Warmth and texture, with or without a privacy liner
$110-$500+ per window
Blackout Shades
Bedrooms, nurseries and media rooms where the room genuinely has to go dark
$90-$550+ per window
Plantation Shutters
A permanent architectural finish that stays with the house
$175-$800+ per window
Cafe Shutters
Street-facing rooms that need privacy at sitting height and daylight above
$150-$550+ per window
Motorized Shades
High openings, whole-room scenes and windows nobody will otherwise touch
$300-$1,500+ per window installed
Custom Drapery
Finishing a room, and blackout in bedrooms where a shade alone will not do it
$300-$4,000+ per window
Valances & Top Treatments
Hiding hardware and finishing a window that already has a shade
$120-$700+ per window
Exterior Solar Shades
Patios, porches and west walls where the heat has to stop outside the glass
$600-$3,500+ per opening
Retractable Awnings
Making a patio usable from May through September
$1,000-$6,000+ installed
Commercial Window Treatments
Offices, healthcare, education, hospitality and multifamily
$12-$45 per square foot installed
Skylight Shades
Skylights and angled glass where heat builds and nothing is reachable by hand
$300-$1,200+ per opening
Sliding Glass Door Blinds
Patio doors and wide sliders that need a one-way draw and a clear walk path
$250-$1,400+ per opening
Panel Track Blinds
Wide openings where a vertical stack would be heavy and a panel glide reads cleaner
$200-$900+ per opening
Sheer Shades
Front rooms that want daylight and privacy at the same time without a hard blackout
$180-$900+ per window
Pleated Shades
Secondary bedrooms, offices and rentals where cellular is more shade than the room needs
$70-$350+ per window
Bamboo Shades
Sunrooms and casual rooms where a natural weave suits the millwork
$120-$600+ per window
Dual Shades
Rooms that need a day setting and a night setting on the same roller tube
$150-$800+ per window
Top-Down Bottom-Up Shades
Street-facing rooms where you want the top light and the bottom privacy
$150-$750+ per window
Cordless Blinds
Homes with young children or pets, where an accessible cord is the wrong answer
$70-$400+ per window
Hardwood Shutters
Conditioned rooms where real wood grain is the point and humidity is controlled
$250-$900+ per window
Composite Shutters
Baths, kitchens and basements where a hardwood panel would move
$175-$700+ per window
Smart Home Shade Integration
Existing motorized shades that need scenes, schedules or app and voice control
$150-$600+ per hub or bridge
Blind Repair & Restring
A blind that still fits the opening but has a failed cord lock, clutch or ladder string
$45-$250+ per unit
Shutter Repair
A broken tilt rod, a loose louver pin or a hinge that has pulled from the frame
$60-$300+ per panel
Motorization Retrofit
Manual shades that fit fine but are out of reach or too many to operate by hand
$200-$800+ per shade
Outdoor Patio Shades
Covered patios and porches taking direct west sun through the afternoon
$400-$2,500+ per opening
Office Window Treatments
Open-plan floors, conference rooms and private offices with screen glare
Quoted per project
Healthcare Window Treatments
Clinics and care facilities needing cleanable surfaces and cordless operation
Quoted per project
Multifamily Window Treatments
Apartment communities and build-to-rent needing one repeatable spec per plan
Quoted per unit at volume

Typical Fishers market ranges as of 2026. The plus sign on upper numbers means your project may exceed the listed maximum based on inspection findings. Get a written scope and quote at no cost.

See the full Fishers window treatment pricing guide →
From the blog

Helpful guides for Fishers homeowners

Read all articles →

Expert Fishers Window Treatment Crews Available Now

Free in home measure and a written quote anywhere in Fishers, from Sunblest Farms to the Geist shoreline. Bring us the room that has been bothering you since the day you moved in.

Service area

Serving Fishers and the surrounding area

Call NowGet Quote
⚠ Window treatments in Fishers? Tap to call (317) 863-9966